Rings
First, check that the ring sizer is at the correct scale. The reference mark must measure exactly 30 mm.
Then, take a ring that fits your finger perfectly (the finger on which you’d like to wear your Monsieur creation). Place it on the ring sizer to find your size. The inside edge of the ring should align with the outside edge of the circle. If your ring falls between two sizes, we recommend choosing the larger one.
Bracelets
Bangles
First of all, check that the guide is at the correct scale: the reference mark must measure exactly 30 mm. If you already have a rigid bangle, compare it with the guide shown below. If you don't have a rigid bangle, you can print our guide, making sure it stays at the correct scale (the image scale must be set to “100%”). Be sure to check the scale reference marks. Then cut out the different circles and make test bracelets. Please note that paper is much less rigid than gold or silver, so make sure the bracelets slide easily over your hand; if in doubt, choose the larger size.
Chain bracelets
Use a tape measure or a piece of string and a ruler: these two simple methods will give you an accurate measurement.
Wrap the tape measure around your wrist, just below the wrist bone, and adjust it so it touches your skin without being tight, then note the measurement where the ends meet. If you don’t have a tape measure, simply wrap a piece of string or a strip of paper around your wrist and mark with a pen where the ends meet, then lay it flat against a ruler to read the measurement.
In either case, feel free to repeat the measurement and, if you’re between two sizes, always choose the larger size.
Here are the different sizes available based on your wrist circumference:
XS : 14 cm
S : 15 cm
M : 16 cm
L : 17 cm
